Filter
Top Products
Operation
31
Performing a Patient Blood Test
1
Turn on the meter by pressing the blue
power button. Check the display and
make sure that all symbol segments
appear (see “Display Symbols” on page 4).
2
Check the Code.
When you turn on the meter, the last result
appears (if this option is selected), followed
by the code number. If the code on the meter
does not match the code on the test strip
bottle, press the C button until the codes
match.
ITY
ITY
Make sure code numbers match.
C Button
SSHosp.book Page 31 Thursday, November 14, 2002 3:44 PM