Filter
Top Products
84
DISPLAY MESSAGES AND PROBLEM-SOLVING GUIDE
The needle may be blocked. Change
the needle and prime the InDuo
TM
insulin doser until insulin appears at
the needle tip. Check that the push
button is pressed completely in and
locked. Open the slide and make sure
that PenFill
®
is inserted correctly. If
PenFill
®
is damaged or empty, change
it. Check that the slide is closed, and
prime the InDuo
TM
insulin doser until
insulin appears at the needle tip.
Why does no insulin appear when I
prime the InDuo
TM
insulin doser and
the push button will not go in?
The needle may be blocked. Change
the needle and prime the InDuo
TM
insulin doser until insulin appears at
the needle tip. To open the slide, dial
back to zero 0 and press the push
button completely in until it locks.
Then change PenFill
®
as described on
page 49.
Why does the push button not
release?
Make sure that the slide is closed
completely. The release button is
locked until the slide is closed.
How do I cancel or change the dialed
dose?
Dial back to zero 0 and press the
push button completely in. Your last
dose and the time passed since
delivery will reappear on the display.
You can increase, decrease, or cancel
the dialed dose until you press the
push button. Do not change the dose
after you have pressed the push
button.
DCO_06084101C_InDuo_OB_US 8/16/04 1:08 PM Page 84