Filter
Top Products
36 TESTING YOUR BLOOD GLUCOSE LEVELS
Cleaning the OneTouch
®
UltraSoft
TM
blood sampler
• Clean the sampler with soap and water as needed.
To disinfect the sampler, prepare a disinfectant
solution of 1 part household bleach to 10 parts
water. Dampen a cloth in this solution and wipe
the sampler thoroughly. Soak only the cap for at
least 30 minutes in the disinfectant solution. Do
not soak the sampler in liquid. Rinse the sampler
and cap with water and dry thoroughly.
Performing a blood glucose test on your
blood sample
Insert the OneTouch
®
Ultra test strip
• Insert the OneTouch
®
Ultra test strip, contact bars
end-first and facing up, into the test port. Push the
OneTouch
®
Ultra test strip in firmly until it will
go no further.
• The InDuo
TM
meter will turn on automatically. All
segments on the meter display will appear briefly.
Then the code number is displayed, followed by
the apply symbol R with the units of
measurement (Á or fi). Verify that the
calibration code and units of measurement are set
DCO_06084101C_InDuo_OB_US 8/16/04 1:08 PM Page 36