Filter
Top Products
INJECTING YOUR INSULIN 41
INJECTING YOUR INSULIN
æ Before beginning, read Important Information
on page 65.
To begin preparation for injecting your insulin, pull
out the InDuo
TM
insulin doser. Do not press any
buttons on the meter cap while you remove the
insulin doser. Attach a NovoFine
®
needle. You will
then be ready to prime your insulin doser and dial
your insulin dose. If your InDuo
TM
insulin doser
contains an insulin suspension (cloudy insulin) you
must resuspend the insulin by turning the InDuo
TM
insulin doser up and down as described in the
PenFill
®
Information For The Patient.
How to attach a NovoFine
®
needle
• Pull out the InDuo
TM
insulin doser.
• Wipe the front rubber stopper of the PenFill
®
with
an alcohol swab.
• Take the protective tab off the NovoFine
®
needle
and screw the needle tightly onto the insulin
doser a.
• Pull off the outer and inner needle caps before
priming your insulin doser.
a
DCO_06084101C_InDuo_OB_US 8/16/04 1:08 PM Page 41