Filter
Top Products
c
e
f
d
b
42 INJECTING YOUR INSULIN
How to prime your InDuo
TM
insulin doser
• Make sure that a NovoFine
®
needle is attached
(see page 24), the push button is pressed in
completely, and the slide is closed. If the slide is
not closed, the release button will be locked.
• Press the release button b. You will see that the
push button jumps out c.
• Dial 1 unit d (When inserting a new PenFill
®
start
with 8 units)
• Hold the InDuo
TM
insulin doser with the needle
upwards and tap the slide gently with your finger
a few times e.
• Press the push button completely in until it locks f.
• A drop of insulin should appear at the needle tip.
If not, repeat the priming procedure until a drop of
insulin appears. If you had opened the slide and your
PenFill
®
is not new, you may need to repeat the
procedure several times.
Please be aware that priming is not finished until a
drop of insulin appears.
DCO_06084101C_InDuo_OB_US 8/16/04 1:08 PM Page 42