Filter
Top Products
10 GETTING YOUR InDuo
TM
SYSTEM READY FOR USE
æ OneTouch
®
Ultra test strips
Your InDuo
TM
meter is designed for use with
OneTouch
®
Ultra test strips only.
• Store the OneTouch
®
Ultra test strip package in a
cool, dry place below 30°C (86ºF). Keep away from
direct sunlight and heat. Do not refrigerate.
• Store your OneTouch
®
Ultra test strips in their
original vial only; do not transfer them to a new
bottle or any other container.
• After removing a OneTouch
®
Ultra test strip from
the vial, immediately replace the vial cap and close
it tightly.
• With clean, dry hands, you may touch the test
strip anywhere on its surface when removing it
from the vial or inserting it into the meter.
• Use each OneTouch
®
Ultra test strip immediately
after removing it from the vial.
•
Write the discard date on the vial label when you
open it for the first time. Discard remaining
OneTouch
®
Ultra test strip
s and the vial 3 months
after the vial was first opened.
Contact bars
Insert this end of
OneTouch
®
Ultra
test strip into the
InDuo
TM
meter.
Top edge
Apply a sample here,
where the narrow
channel meets the
top edge of
OneTouch
®
Ultra
test strip.
Confirmation
window
This is where you
confirm if a large
enough sample
has been applied
to the top edge.
DCO_06084101C_InDuo_OB_US 8/16/04 1:08 PM Page 10