Support User Manuals

Invacare Spree XT Mobility Aid User Manual

Open as PDF

of 76

SECTION 11—TRANSPORT READY OPTION

Part No 1118364 73 Spree XT

Securing the Occupant

Wheelchair-Anchored Belts

ƽ WARNING

The pelvic belt that is provided by Invacare has been tested for use in a motor

vehicle on this wheelchair ONLY. DO NOT replace the pelvic belt with a different

style pelvic belt.

NOTE:Forthisprocedure,refertoFIGURE11.1.

Thewheelchairhasbeenprovidedwithapelvicbeltwhichmeetstherequirementsof

ANSI/RESNAWC/19.

ThepelvicbeltprovidedbyInvacarehasbeendesignedtoaccommodateuseoneither

sideofthevehicle.Ifnecessary,followtheinstructionsbelowtoreversetheorientationof

thepelvicbelttoaccommodatethevehicle‐anchoreduppertorsobelt.

1. Installthepelvicbeltpin(DetailʺAʺofFIGURE11.1)intoslotinthepelvicbelt

bracket.Pullupwardsuntilitsnapsintoplace.

NOTE:Notethepositionofthemaleendofthebeltwheninstallingthepelvicbeltontothepelvic

beltbrackets.Themaleendofthepelvicbelt(DetailʺAʺofFIGURE11.1)hasapinwhichisused

tosecurethevehicle‐anchoreduppertorsobelt.

2. RepeatSTEP1fortheoppositepelvicbeltbracket.

3. Installthevehicle‐anchoreduppertorsobeltontothepinonthemaleendofthepelvic

belt.

FIGURE 11.1 Securing the Occupant

DETAIL “A” -

PELVIC BELT

Pelvic Belt

Slot

Tie-Down

Bracket

Pin (Used to secure

the vehicle anchored

upper torso belt.)

previous next