Support User Manuals

Invacare Spree XT Mobility Aid User Manual

Open as PDF

of 76

SECTION 6—BACK/SEAT

Spree XT 54 Part No 1118364

Installing/Removing Stroller Handles

NOTE:Forthisprocedure,refertoFIGURE6.3.

Installing Stroller Handles

1. Removetheplugbuttonsfrombothbackcanes,ifnecessary.

2. Slidethestrollerhandleintothebackcanes.

3. Alignthemountingholesofthestroller

handleandthebackcanes.

4. Pressthebuttononthequick‐release

pinandinsertthequick‐releasepin

throughthebackcaneandstroller

handle.

5. Releasethebuttononthequick‐release

pin.

6. Pullonthestrollerhandletomakesure

itislockedsecurelyinplace.

FIGURE 6.3 Installing/Removing Stroller

Handles

Removing Stroller Handles

1. Pushinthebuttonsofthequick‐releasepins.

2. Pulloutthequick‐releasepinsthatsecurethestrollerhandletothebackcanes.

3. Removethestrollerhandlefromthewheelchair.

4. InstalltheNEWstrollerhandleifdesired.RefertoInstallingStrollerHandleson

page 54.

Back Cane

Mounting

Holes

Stroller Handle

Button

Quick-Release Pin

previous next