Support User Manuals

Invacare Spree XT Mobility Aid User Manual

Open as PDF

of 76

SECTION 6—BACK/SEAT

Spree XT 58 Part No 1118364

Installing/Replacing Chest Positioning Straps

NOTE:Forthisprocedure,refertoFIGURE6.7.

Installing

1. Positionthechestpositioningstraptooneoftheholesonthebackcane.

NOTE:Thestandardrecommendedpositionforthechestpositioningstrapisinthetopholeof the

backcane,butmaybemountedaccordingtotheuserʹsneeds.

2. Securethechestpositioningstraptothebackcaneswiththenew/existinghexscrew

andlocknut(FIGURE6.7).

3. RepeatSTEPS1‐2foroppositeside.

Replacing

1. Removethehexscrewthatsecuresthechestpositioningstraptothebackcane.

2. Discardexistingchestpositioningstrap.

3. RepeatSTEPS1‐2foroppositeside,ifnecessary.

4. Installthenewchestpositioningstrap.RefertoInstallingonpage 58.

FIGURE 6.7 Installing/Replacing Chest Positioning Straps

Back Cane

Locknut

Chest Positioning Strap

Hex Screw

previous next