Support User Manuals

Invacare Spree XT Mobility Aid User Manual

Open as PDF

of 76

SECTION 4—FRONT RIGGINGS

Part No 1118364 39 Spree XT

Adjusting Footplate Height and Calfpad Height/Depth

NOTE:Forthisprocedure,refertoFIGURE4.9.

Adjusting the Footplate Height

1. Loosenlocknutandwashersecuringtheslidetubetotheelevatinglegrest.

2. Repositionfootplatetodesiredheightsecurelytightenlocknutandwasher.

3. Ifnecessary,repeatSTEPS1‐2toadjustremainingfootplateheight.

Adjusting Calfpad Height

1. Loosenthemountingboltandwasherthatsecurethecalfpadbrackettotheelevating

legrestassembly.

2. Slidethecalfpadbracketupordownuntilthedesiredcalfpadheightisobtained.

3. Tightenthemountingboltandwashersecuringthecalfpadbrackettotheelevating

legrestassembly.

4. Ifnecessary,repeatSTEPS1‐3toadjustremainingcalfpadbracket.

Adjusting Calfpad Depth

1. Removethemountingscrew,spacerandlocknutthatsecurethecalfpadtothecalfpad

bracket.

2. Insertmountingscrewthroughoneoffourcalfpadbracketmountingholes.

3. Usingthemountingscrewspacerandlocknut,securethecalfpadtothecalfpad

bracket.

4. Ifnecessary,repeatSTEPS1‐3toadjustremainingcalfpadassembly.

FIGURE 4.9 Adjusting Footplate Height and Calfpad Height/Depth

Calfpad Bracket Mounting Holes

Calfpad Bracket

Mounting Screw

Locknut

Calfpad

Mounting Bolt and Washer

Spacer

Slide Tube

Footplate

Elevating Legrest Assembly

Locknut and Washer

previous next