Support User Manuals

Invacare Spree XT Mobility Aid User Manual

Open as PDF

of 76

SECTION 6—BACK/SEAT

Part No 1118364 57 Spree XT

Installing/Replacing Seat Positioning Straps

NOTE:Forthisprocedure,refertoFIGURE6.6.

Installing

1. Removethehexscrewandlocknutthatsecuresthebackcanetothebackplate.

2. Positiontheseatpositioningstrapagainstthebackplate.

3. Installthehexscrewthroughtheseatpositioningstrap,covedspacersandbackcane.

4. Securelytightentheseatpositioningstraptothewheelchairwiththelocknut.

5. RepeatSTEPS1‐4foroppositeside.

Replacing

1. Removethehexscrew,locknutandseatpositioningstrapfromthebackplateofthe

wheelchairframe.

2. Discardexistingseatpositioningstrap.

3. Installthenewseatpositioningstraptothewheelchair.RefertoInstallingonpage 57.

FIGURE 6.6 Installing/Replacing Seat Positioning Straps

Seat Positioning Strap

Hex Screw

Locknut

Back Plate

Back Cane

Coved Spacers

previous next