Filter
Top Products
SECTION 13—ELECTRONICS
Part No 1134839 87 Power Tiger™
SECTION 13—ELECTRONICS
ƽ WARNING
After any adjustments, repair or service and before use, make sure that all attaching
hardware is tightened securely. Otherwise injury or damage may result.
Removing/Installing Joystick
NOTE: For this procedure, refer to FIGURE 13.1.
1. Disconnect joystick from controller.
2. Cut plastic clips that secure cord to wheelchair frame.
3. Rotate release lever counterclockwise to unlock the joystick mounting tube.
NOTE: Illustration depicts the locked position of the release lever facing forward and the unlocked
position facing rearward. The unlocked and locked positions will not always be as shown. Positions
shown for reference only.
4. Remove joystick from T-arm mounting bracket.
5. To install, reverse STEPS 1-4.
NOTE: When installing, ensure joystick is facing front of wheelchair.
.
FIGURE 13.1 Removing/Installing Joystick
Front of Wheelchair
Joystick Mounting Tube
Unlocked
Locked
Release Lever
T-Arm
Mounting Bracket
NOTE: T-Arm pad not
shown for clarity.