Filter
Top Products
SECTION 11—BATTERIES
Power Tiger™ 72 Part No 1134839
Using the Proper Batteries
NOTE: For this procedure, refer to FIGURE 11.1.
1. Place battery on ground/flat surface.
2. Visually inspect the battery to ensure the correct position of the POSITIVE and
NEGATIVE terminals:
ƽ WARNING
Batteries with terminal configuration (POSITIVE on the left and NEGATIVE on the
right) MUST be used. Batteries that have the reverse terminal configuration MUST
not be used. Otherwise injury and damage may occur.
Terminals MUST have a cross hole in them as shown in Detail “A” below.
FIGURE 11.1 Using the Proper Batteries
Proper Battery to be Used
POSITIVE (+) Battery
Terminal/Post
NEGATIVE (+) Battery
Terminal/Post
22NF
POSITIVE (+) Battery
Terminal/Post
NEGATIVE (+) Battery
Terminal/Post
DETAIL “A” - TERMINAL CROSS HOLES
Terminal Cross Holes
22NF
DO NOT Use