Filter
Top Products
SECTION 11—BATTERIES
Part No 1134839 73 Power Tiger™
Removing/Installing the Battery Boxes
NOTE: For this procedure, refer to FIGURE 11.2.
NOTE: To install the battery box onto the wheelchair, reverse the following steps.
1. Place the wheelchair in a well ventilated area where work can be performed without
risking damage to carpeting or floor covering.
2. Verify the joystick On/Off switch is in the Off position.
3. Disconnect the battery cables from the battery box lid connectors.
4. Disconnect the battery box retention strap.
5. Remove the battery boxes from the battery box trays.
FIGURE 11.2 Removing/Installing the Battery Boxes
To Controller
Battery Cables
Battery Box Lid
Connector
Battery Box
Retention Strap
Battery Box Tray
Battery Box
Front of
Wheelchair
Rear of
Wheelchair