Filter
Top Products
SECTION 6—WHEELCHAIR OPERATION
Part No 1134839 35 Power Tiger™
FIGURE 6.4 Engaging the Tilt-in-Space
Installing/Removing Footrests
NOTE: For this procedure, refer to FIGURE 6.5.
1. Turn the footrest to the side (open footplate is perpendicular to the wheelchair).
2. Insert the footrest mounting pin into footrest mounting tube.
3. Push the footrest towards the inside of
the wheelchair until it locks into place.
NOTE: The footrest will be on the inside of the
wheelchair when locked in place.
4. Repeat STEPS 1- 3 for the other footrest
assembly.
5. To remove the footrest, push the
footrest release lever inward, rotate
footrest outward.
6. Adjust footrest height if desired. Refer
to Adjusting Footrest Height
on
page 36.
FIGURE 6.5 Installing/Removing Footrests
DETAIL “A”
Locked
Position
Release
Pedal
Wheelchair Frame
Locking
Mechanism
Unlocked
Position
Back Cane
Footrest
Mounting
Pin
Footrest
Mounting
Tube
Footrest