Filter
Top Products
SECTION 9—SEAT
Power Tiger™ 68 Part No 1134839
Removing/Installing the Seat Pan
NOTE: For this procedure, refer to FIGURE 9.3.
Removing
NOTE: If a seating system is being used on the wheelchair, refer to your particular seating system
manufacturer's Owner's Manual for installation and removal of the seating system.
1. If so equipped, remove seating system from wheelchair.
2. Remove the four mounting screws that secure the seat pan to the seat rails.
3. Remove existing seat pan and discard.
Installing
1. Position the new seat pan on crossmembers.
2. Secure with the existing four mounting screws. Securely tighten.
3. Reinstall seating system onto wheelchair.
FIGURE 9.3 Removing/Installing the Seat Pan
Rigid Seat Pan
Seat Frame Assembly
Mounting Screws
Mounting Screws
Crossmember