Filter
Top Products
SECTION 9—SEAT
Part No 1134839 67 Power Tiger™
Adjusting the Telescoping Front Frame Tubes
CAUTION
When determining the depth of the telescoping front frame tubes, make sure the
rear of the footrests DO NOT interfere with the movement of the front casters.
Otherwise, damage to the wheelchair may result or proper operation may be
impeded.
NOTE: For this procedure, refer to FIGURE 9.2.
1. Remove the mounting screw and locknut that secure the telescoping tube to the seat
rail.
2. Adjust telescoping tube in or out to desired mounting adjustment hole.
3. Reinsert mounting screw and install locknut. Securely tighten.
4. Repeat STEPS 1-3 for opposite telescoping front frame tube.
5. Rotate front casters to ensure there is no interference between the footrests and front
casters.
6. If interference occurs, repeat procedure and adjust telescoping front frame tube
accordingly.
FIGURE 9.2 Adjusting the Telescoping Front Frame Tubes
Seat Rail
Mounting Screw
Mounting Adjustment Holes
Telescoping Tube
Locknut