Filter
Top Products
SECTION 5—SETUP
Power Tiger™ 30 Part No 1134839
SECTION 5—SETUP
Preparing to Use the Power Tiger
NOTE: For this procedure, refer to FIGURE 5.1.
1. Connect the battery harness/charger connectors to the battery box(es).
2. Attach the right and left motor connectors to the controller connectors.
3. Connect the battery harness/charger connectors (BLUE) to the controller connector
(BLUE).
4. Connect the joystick cable to the controller connector.
FIGURE 5.1 Preparing to Use the Power Tiger
Battery Harness/Charger
Connectors (to Battery Boxes)
Right and Left Motor
Connectors
(to Controller Connectors)
BLUE Battery Harness/Charger
Connectors (to Controller)
Joystick Cable (from Joystick)
Joystick Cable (to Controller)
NOTE: Hardware exploded for
clarity. It is not necessary to
remove or install any hardware.