SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Part No 1134839 25 Power Tiger™
Inspect/Adjust Weekly
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks
and wear, and should be replaced.
❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come
to a gradual stop.
❑ Make sure all caster/wheel/fork/headtube fasteners are secure and not damaged/
missing.
❑ Inspect tires for flat spots and wear.
❑ Check pneumatic tires for proper inflation.
❑ Ensure that casters are free of debris.
Inspect/Adjust Monthly
❑ Make sure axle nut and wheel mounting nuts are secure on drive wheels.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑ Make sure wheel locks do not interfere with tires when rolling.
❑ Make sure wheel lock pivot point are free of wear and looseness.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Ensure that casters are free of debris.
Inspect/Adjust Periodically
❑ Make sure wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect all fasteners.
❑ Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
❑ Make sure clothing guards are secure.
❑ Make sure arms are secure but easy to release and adjustment levers engage properly.
❑ Make sure adjustable height arms operate and lock securely.
❑ Make sure upholstery has no rips.
❑ Make sure armrest pad sits flush against arm tube.
❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come
to a gradual stop.
❑ Make sure wheel locks are easy to engage.
❑ Inspect foam handgrips for damage. If damaged, have them replaced by a qualified
technician.
❑ Check that all labels are present and legible. Replace if necessary.
❑ Ensure that casters are free of debris.