Filter
Top Products
11 WHEELS
Part No 1167484 83 Invacare
®
Crossfire™T7A Wheelchair
2. Remove the threaded bushing and mounting screw securing the suspension fork top to the elastomer and the suspension fork bottom. DO NOT
use excessive force.
3. If replacing the elastomer, discard the existing elastomer.
Installing the Elastomer
1. Position the new elastomer between the suspension fork top and suspension fork bottom.
2. Align the mounting holes in the suspension fork top and suspension
fork bottom.
3. Using the threaded bushing and mounting screw, secure the
suspension fork top and suspension fork bottom. DO NOT use
excessive force.
4. Apply Loctite 242 to the mounting screw.
5. Reinstall the mounting screw into the threaded bushing and tighten
securely.
FIGURE20 Removing/Installing the Elastomers (Suspension Forks
Only)
Make sure the elastomer sits in the two recessed areas on the fork.
ƽ
WARNING
Use Loctite 242 when reinstalling the mounting
screw into the threaded bushing. Otherwise the
fork can become disassembled. Possible injury or
damage could result.
Suspension Fork Top
Locknut
Suspension Fork
Bottom
Elastomer
Threaded Bushing
Mounting
Screw
Caster
Mounting
Screw