Filter
Top Products
9 SEAT
Part No 1167484 57 Invacare
®
Crossfire™T7A Wheelchair
FIGURE1 Replacing Seat Upholstery
9.2 Seat Angle Adjustment
1. Fold the back. Refer to Unfolding/Folding the Back on page 41.
2. Flip wheelchair upside down.
3. Loosen, but DO NOT remove, the two mounting screws that secure the front of the seat frame to the side frame.
4. On the top of each crescent link, remove the locknut and washer from the mounting screw.
5. On the bottom of each crescent link, remove the locknut and washer from the mounting screw.
6. Adjust seat angle by performing one of the following:
• Moving top mounting screws to a new adjustment hole in each crescent link.
The seat angle can be changed by raising or lowering the rear of the seat frame relative to the side frame.
Seat
Upholstery
Detail “A”
Fastening Strips located in
between the back
upholstery cover and the
seat upholstery
Seat Upholstery