Filter
Top Products
5 SAFETY INSPECTION
Part No 1167484 29 Invacare
®
Crossfire™T7A Wheelchair
Suggested Maintenance Procedures
1. Before using your wheelchair, make sure all nuts and bolts are tight.
2. Check all parts for damage or wear and replace.
3. Check all parts for proper adjustment.
4. Keep quick/quad-release axles free of dirt and lint to ensure positive locking and proper operation. Refer to Adjusting Quick-Release Axles
on
page 63 or Adjusting Quad-Release Handles
on page 64.
5. Clean quick-release axles and camber inserts once a week with a Teflon® lubricant.
ƽ
WARNING
DO NOT use WD-40®, 3-in-1 oil®, or other penetrating lubricants on quick-release axles or camber inserts. Otherwise,
binding and/or damage to the wheelchair may occur.
ƽ
WARNING
DO NOT use your wheelchair unless it has the proper tire pressure (p.s.i.).
DO NOT overinflate the tires. Failure to follow these suggestions may cause the tire to explode and cause bodily harm.
The recommended tire pressure is on the sidewall of the tire.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced if
damaged. Replace as recommended, refer to Replacing/Repairing Rear Wheel Tire/Tube
on page 30 and
Replacing/Repairing Caster Tire/Tube
on page 30.