Filter
Top Products
10 WHEEL LOCKS
Invacare
®
Crossfire™T7A Wheelchair 60 Part No 1167484
5. Repeat the above procedures until the wheel locks hold the wheelchair.
FIGURE1 Replacing/Adjusting the Wheel Locks
10.2 Changing Wheel Lock Handle Position
1. Loosen, but DO NOT remove, the rear handle mounting screw.
2. Remove the front handle mounting screw and locknut.
3. Align the front handle mounting hole with one of three desired
mounting positions on the wheel lock.
4. Using the front handle mounting screw and locknut, secure the
handle to the wheel lock.
5. Securely tighten the front and rear handle mounting screws and
locknuts.
6. Repeat STEPS 1-5 on remaining wheel lock handle.
FIGURE2 Changing Wheel Lock Handle Position
3/16 inch
(1/8-inch)
Tire
Wheel Lock
Shoe
Mounting Screws
Wheel
Lock
Wheel Lock
Under Mount Wheel Lock
Push-to-Lock or Pull-to-Lock Wheel Locks
3/16 inch
(1/8-inch)
Wheel Lock
Shoe
Tire
Mounting Screws
Wheel lock
Handle
Front Handle
Mounting Screw
and Locknut
Rear Handle
Mounting Screw
Mounting
Positions