Filter
Top Products
8 BACK
Invacare
®
Crossfire™T7A Wheelchair 50 Part No 1167484
Removing the Back Upholstery Cover
1. Remove the seat cushion, if applicable.
2. Pull the back upholstery cover away from the adjustable tension back upholstery separating the fastening strips of the back upholstery cover from
the fastening strips of the adjustable tension back upholstery and seat (Details “A” and “B”).
3. Remove back upholstery cover from wheelchair.
Removing the Adjustable Tension Back Upholstery
1. Remove the back upholster cover. Refer to Removing the Back Upholstery Cover
.
2. Slide adjustable tension back upholstery off back canes (Details “C” and “D”).
Removing the Lumbar Strap
1. Remove the back upholster cover. Refer to Removing the Back Upholstery Cover
.
2. Fold back forward. Refer to Unfolding/Folding the Back
on page 41.
3. Loosen the top mounting screw but DO NOT remove (Detail “E”).
4. Remove the lower mounting screw, coved spacer, washer and locknut from each back cane (Detail “E”).
5. Slide lumbar strap off back canes (Details “D” and “E”).
Installing the Lumbar Strap
1. Install lumbar strap (Details “D” and “E”).
2. Install lower mounting screw, coved spacer, washer and locknut onto each back cane (Detail “E”).
3. Tighten the top and bottom mounting screws (Detail “E”).
4. Return back to upright position. Refer to Unfolding/Folding the Back
on page 41.
5. Install the back upholstery. Refer to Removing the Back Upholstery Cover
Installing the Adjustable Tension Back Upholstery
1. Install the adjustable tension back upholstery onto the back canes (Details “D”, “F”, and “A”).