Filter
Top Products
8 BACK
Invacare
®
Crossfire™T7A Wheelchair 48 Part No 1167484
FIGURE5 Back Angle Adjustment - Adjustment Square Position
8.3 Adjustable Tension Back Upholstery
The Back Upholstery Cover
+8°
ƽ
WARNING
ALWAYS perform these procedures in the presence of an assistant. The position of the footrest, camber tube, seat angle,
back angle, the tautness of the back upholstery as well as the user's condition are directly related to the wheelchairs
stability. Any change to one or any combination of the five may cause the wheelchair to decrease in stability. Use EXTREME
caution when using a new seating position. The addition of anti-tippers may be required.
The back upholstery cover is designed for three reasons:
• The first is as a modesty cover.
• The second is to keep the cushion from sliding out of the back of the wheelchair.
• The third is a sacral support depending upon how far or tight the flap is pulled under the seat cushion.
• The adjuster fastening straps can be adjusted at various levels of tension to accommodate individual end-users.
91°
Seat Rail
Back Cane
Back Angle
Plate
Hole in adjustment
square will align with
8+ when installed in
this orientation