Filter
Top Products
7 ARMS
Invacare
®
Crossfire™T7A Wheelchair 34 Part No 1167484
7 Arms
7.1 Installing the Swingaway Padded Armrest Socket
1. Remove the back. Refer to Removing/Installing the Back Frame on page 55.
2. Remove the split ring of the back release cord from the plunger pin in the back stop insert.
3. Remove the plunger pin from the back stop insert.
4. Perform STEPS 2-3 on remaining back stop insert.
FIGURE1 Disconnect Back Release Cord
ƽ
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
Do not attempt to lift or tilt a wheelchair by using any removable (detachable) parts. Lifting by means of any removable
(detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair.
Split Ring
Back Release Cord
Plunger Pin
Back Stop Insert