Filter
Top Products
4 SAFETY/HANDLING OF WHEELCHAIRS
Invacare
®
Crossfire™T7A Wheelchair 18 Part No 1167484
To assure stability and proper operation of your wheelchair, you MUST at all times maintain proper balance. Your wheelchair has been designed to
remain upright and stable during normal daily activities as long as you DO NOT move beyond the center of gravity.
Virtually all activities which involve movement in the wheelchair have an effect on the center of gravity. Invacare recommends using seat positioning
straps for additional safety while involved in activities that shift your weight.
DO NOT lean forward out of the wheelchair any further than stability will allow. Make sure casters are pointing in the forward position whenever
you lean forward. This can be achieved by advancing the wheelchair and then reversing it in a straight line.
Many activities require the wheelchair owner to reach, bend and transfer in and out of the wheelchair. These movements will cause a change to the
normal balance, the center of gravity, and the weight distribution of the wheelchair.
To determine and establish your particular safety limits, practice bending, reaching and transferring activities in several combinations in the presence
of a qualified health-care professional before attempting active use of wheelchair.
Proper positioning is essential for your safety. When reaching, leaning, bending forward, it is important to use the front casters as a tool to maintain
stability and balance.
ƽ
WARNING
Invacare strongly recommends proceeding down ramps or slopes slowly to avoid hard braking or sudden stops.
Be aware that carrying heavy objects on your lap while occupying the wheelchair may adversely affect the stability of the
wheelchair, resulting in serious bodily injury to the user, damage to the wheelchair and surrounding property.
This wheelchair has been designed to accommodate one individual. If more than one individual occupies the wheelchair this
may adversely affect the stability of the wheelchair, resulting in serious bodily injury to the user and passenger and damage
the wheelchair and surrounding property.
ƽ
WARNING
DO NOT attempt to reach objects if you have to move forward in the seat or pick them up from the floor by reaching
down between your knees.
The position of the footrest, camber tube, back angle, the tautness of the back upholstery as well as the user's condition are
directly related to the wheelchair's stability. Any change to one or any combination of the five may cause the wheelchair to
decrease in stability. Use EXTREME caution when using a new seating position. The addition of anti-tippers may be
required.