Filter
Top Products
11 WHEELS
Part No 1167484 79 Invacare
®
Crossfire™T7A Wheelchair
11.13 Removing/Installing/Repositioning the Caster Assemblies
Standard Forks
Removing Front Caster
1. Remove the mounting bolt, axle spacers and locknut that secure the
front caster to the fork.
2. Remove the caster from the fork.
Installing Front Caster
1. Using the mounting bolt, axle spacers and locknut, secure the caster
to the desired caster mounting position.
FIGURE16 Removing/Installing/Repositioning the Caster
Assemblies - Standard Forks
Suspension Forks
Removing the Caster
1. Using two allen wrenches, turn mounting screws in opposite directions and remove one mounting screw from fork.
2. Remove the threaded bushing with mounting screw and two spacers securing the caster to the fork. DO NOT use excessive force.
3. Remove the caster from the fork.
If replacing a front caster note the mounting
position of the existing front caster for installation
of the new front caster.
Both front casters MUST be the same size and
adjusted to the same height.
Fork
Mounting Bolt
Axle Spacer
Locknut
Caster
Axle Spacer
One mounting screw will not turn.