Filter
Top Products
Instruction Manual
IB-106-340CDR Original Issue
January, 2002
Rosemount Analytical Inc. A Division of Emerson Process Management Replacement Parts 7-1
Hazardous Area Oxymitter DR
SECTION 7
REPLACEMENT PARTS
Table 7-1. Replacement Parts for Probe
Figure and Index No. Part Number Description
3D39496G06
1
V-Strut Assembly (18 in.)
3D39496G07
1
V-Strut Assembly (3 ft)
3D39496G08
1
V-Strut Assembly (6 ft.)
3534B56G04
2
Contact and Thermocouple Assembly (18 in.)
3534B56G05
2
Contact and Thermocouple Assembly (3 ft)
3534B56G06
2
Contact and Thermocouple Assembly (6 ft)
7-1 3535B44G01
3
Cell Replacement Kit (18 in.)
7-1 3535B44G02
3
Cell Replacement Kit (3 ft)
7-1 3535B44G03
3
Cell Replacement Kit (6 ft)
7-1 3535B44G04 Cell Replacement Kit (No Inconel and Platinum Pad Assembly)
7-2 1L03825G01 Probe Disassembly Kit
1U05677G04 F/A Diffuser Hub Assembly (Snubber Diffusor)
1U05677G06 F/A Diffuser Hub Assembly (For use with Abrasive Shield)
6292A74G02 Ceramic Diffusion Element Replacement Kit
1N04966H02 Abrasive Shield Assembly (3 ft)
1N04966H03 Abrasive Shield Assembly (6 ft)
1M03241H01 90° Elbow for Bypass
4507C26G07 Bypass Gas Pickup Tube (3 ft)
4507C26G08 Bypass Gas Pickup Tube (6 ft)
4507C26G09 Bypass Gas Pickup Tube (9 ft)
263C152G01 Reference Gas Set
771B635H01 Calibration Gas Rotometer
1L03650H01 F/A Diffusion Hub Setscrew
1
V-Strut assembly includes contact and thermocouple assembly.
2
Contact and thermocouple assembly includes platinum pad and inconel wire
3
Cell replacement kit includes platinum pad and inconel wire.
NOTE
The replacement parts listed above must be obtained only from the manu-
facturer or his agent.
7