Filter
Top Products
Instruction Manual
IB-106-340CDR Original Issue
January, 2002
Rosemount Analytical Inc. A Division of Emerson Process Management Maintenance and Service 4-9
Hazardous Area Oxymitter DR
4-9 TERMINATION HOUSING WIRING
Under normal circumstances, the right termina-
tion housing should not need to be removed.
This side of the housing contains only two
jumper wires that connect the connectors from
the integral electrical barrier to pins in the
housing wall. If these jumpers should become
disconnected or need to be replaced, use the
diagram in Figure 4-6 to connect the jumpers.
THERMOCOUPLE -
(YELLOW)
HEATER (BLACK)
HEATER (BLACK)
THERMOCOUPLE +
(RED)
OXYGEN CELL -
(GREEN)
OXYGEN CELL +
(ORANGE)
36210011
Figure 4-6. Termination Housing Connections
4