Filter
Top Products
25
Reference Manual
00809-0200-4705, Rev AA
Section 4: Commissioning
May 2015
Commissioning
4.6.1 AMS Wireless Configurator
When the device has joined the network, it will appear in the Device Manager as illustrated
below.
Troubleshooting
If the device is not joined to the network after power up, verify the correct configuration of the
Network ID and Join Key, and verify that Active Advertising has been enabled on the Gateway.
The Network ID and Join Key in the device must match the Network ID and Join Key of the
Gateway.
The Network ID and Join Key may be obtained from the Gateway in the upper right hand corner
labeled network information. The Network ID and Join Key may be changed in the wireless
device by using the following Fast Key sequence.
Function Key sequence Menu items
Wireless
2,1,3 Join Device to Network