Filter
Top Products
9
Reference Manual
00809-0200-4705, Rev AA
Section 2: Configuration
May 2015
Configuration
Configuring on the bench with AMS Wireless Configurator
AMS Wireless Configurator is capable of connecting to devices directly, using a HART modem,
or with the Gateway. When configuring on the bench with a HART modem, double click the
device icon, then choose the Configure/Setup tab (or right click and select Configure/Setup).
Configure the device settings using the Direct Connection menu. When configuring with the
Gateway, double click the device icon then choose the Configure/Setup tab (or right click and
select Configure/Setup). Configure the device settings using the Wireless Connection menu.
To check or change sensor configuration using a Field Communicator, enter the following Fast
Key Sequence: 2, 1, 2.
2.3 Supported Engineering Unit Codes
The following engineering units are supported by the 705 totalizer.
Total Volume Volumetric Flowrate
US Gallons
US Gallons per Second
US Gallons per Minute
US Gallons per Hour
US Gallons per Day
Liters
Liters per Second
Liters per Minute
Liters per Hour
Imperial Gallons
Imperial Gallons per Second
Imperial Gallons per Minute
Imperial Gallons per Hour
Imperial Gallons per Day
Cubic Meters
Cubic Meters per Second
Cubic Meters per Minute
Cubic Meters per Hour
Cubic Meters per Day
Cubic Yards
Cubic Yards per Second
Cubic Yards per Minute
Cubic Yards per Hour
Cubic Yards per Day
Cubic Inches
Cubic Inches per Second
Cubic Inches per Minute
Cubic Inches per Hour
Cubic Inches per Day
Pulses
Hertz