Filter
Top Products
3
Reference Manual
00809-0200-4705, Rev AA
Section 1: Introduction
May 2015
Introduction
Preparing (or sealing) the conduit entries
Due to possible damage from moisture after installation, ensure that each conduit entry is
either sealed with a conduit plug with appropriate thread sealant, or has an installed conduit
fitting or cable gland with appropriate thread sealant.
Figure 1-2. Locating Conduit Entries
A. Conduit entry
Connecting the Field Communicator to the transmitter
The power module needs to be connected for the Field Communicator to interface with the 705
Transmitter.
Figure 1-3. Field Communicator Connections
1.2.3 Choosing an installation location and position
When choosing an installation location and position, take into account access to the
transmitter. For best performance, the antenna should be vertical with space between objects in
a parallel metal plane, such as a pipe or metal framework, as the pipes or framework may
adversely affect the antenna’s performance.
A
A
COMM
P/N 00753-9200-0020
1
2
3
4