Filter
Top Products
The Standard Bolus symbol ( ) blinks for five seconds (the bolus delivery
start delay).
After this bolus delivery start delay, your pump beeps three times and begins to
deliver the total bolus amount programmed. The countdown of the remaining
bolus amount appears on the display.
Cancelling a Menu-Guided “Scroll” Standard Bolus
– during programming (the bolus amount blinks):
You have three options for cancelling a “Scroll” Standard Bolus during
programming:
• If you do not press any key for 20 seconds, your pump returns to the
RUN screen (timeout).
• Exit to the STANDARD BOLUS menu by pressing
d+a simultaneously.
• Set the bolus amount to 0.0 units. Press f to exit.
No bolus is delivered.
– during the start delay ( is blinking):
• Press
s or a. A melody plays. Your pump returns to the RUN screen.
An alert A8: BOLUS CANCELLED occurs. Press f twice to confirm
and turn off the alert.
No bolus is delivered.
Please refer to section “Alert A8: BOLUS CANCELLED” (page 153) for more
information.
–
during bolus delivery (countdown of bolus amount):
• Press and hold
s or a for 3 seconds until you hear a melody.
An alert
A8: BOLUS CANCELLED occurs. Press
f twice to confirm
and turn off the alert.
Bolus deliver
y is interrupted.
Please refer to section “Alert A8: BOLUS CANCELLED” (page 153) for
more informa
tion.
Chapter 4: Boluses and TBRs ACCU-CHEK Spirit Insulin Pump
81