73Chapter 2. SONG MODE
2
• You use SONG PLAY mode to select songs for replay, to
start and stop the replay, and to set the various replay pa-
rameters.
• You can switch into VOICE mode and make adjustments in
track voices and track balances while playback is in progress.
• By selecting playback of an empty song (a song without
data), you can use the auto-accompaniment feature as back-
ground for normal keyboard play. (→ p.106)
• SONG PLAY includes eight submodes. You can switch from
SONG PLAY into any of these submodes by pressing the
appropriate key, as follows.
1(PlayFx) Move to Play Effects submode. (→ p.80)
2(TrView) Move to Track View submode. (→ p.100)
3(OutCh.) Move to Output Channel submode.
(→ p.103)
5(Save) Move to Save Song submode. (→ p.307)
s+5(Save) Move to Save Song submode
(SMF save). (→ p.307)
6(Load ) Move to Load Song submode. (→ p.310)
s+6(Load) Move to Load Song submode.
(→ p.310)
e Move to Record submode. (→ p.109)
e Move to Song Edit submode. (→ p.129)
j Move to Song Job submode. (→ p.138)
1. Press s.
▼ The indicator above the key comes on, and the QY700 en-
ters SONG mode (SONG PLAY).
2. Move the cursor onto the song number on the screen,
and select the song using the data dial, n/y, or the
numeric keypad.
3. Press p to start playback.
▼ The PLAY indicator comes on, and playback begins.
4. To stop the playback, press s.
• If you start song replay from a point other than the begin-
ning, you may find that some of the song’s PATTERN-
track and CHORD-track data drops out. You can solve the
problem by moving the start point to a measure at which a
full pattern change occurs.
1. Song number and name
• You use the song number to select a song for playback or
recording.
• The screen displays the song name (if any) directly to the
right of the song number.
• To set or change the song name, you use the SONG NAME
job (→ p.165).
0101
1101
Song no.: 01,...,20
1. Move the cursor onto the song number on the screen.
2. Select a song number using the data dial, n/y, or
the numeric keypad.
2. Pattern setup
• This parameter determines whether the QY700 uses the pat-
tern effects (the effects set up within each pattern) during
song replay.
• If you set this to OFF, the QY700 will not use the pattern
effects. Instead, it uses the effects that you have selected
under the EFFECT mode.
• If you set this to ON, the QY700 uses the effects set up
within the current pattern. In this case, the pattern’s effect
settings overwrite the EFFECT-mode settings. The EFFECT-
mode settings therefore changes each time the pattern
changes.
1. SONG PLAY
