117Chapter 2. SONG MODE
2
Realtime Recording: TEMPO Track
5. Song Recording
SHIFT F1 F2 F3 F4 F5 F6 SHIFT EXIT
Recording track
Recording mode
5. Make the required tempo changes using the data dial,
n/y, or the numeric keypad.
▼ The tempo changes are recorded as you make them.
6. When you are finished recording the tempo changes,
press s.
▼ The QY700 returns to the SONG PLAY screen.
• You use this function to record tempo changes for the song.
• This section describes the 3 (REPLACE ) realtime
recording method. When you record with this method, you
overwrite any data already existing on the track.
• Note that it is not possible to select the 4 (OVERDUB)
method for TEMPO-track recording.
0101
1101
Tempo: = 25.0,...,300.0
1. Starting from the SONG PLAY page, press e.
▼ The QY700 displays the Recording Standby page. The RE-
CORDING indicator comes on.
2. Press 3 (REPLACE).
3. Press u or d as necessary to set
the recording track to TEMPO.
4. Press p.
▼ The PLAY indicator begins flashing. The QY700 counts
out the specified number of lead-in measures (as set by the
COUNT parameter; see page 78), and then begins the re-
cording. The cursor automatically moves to the tempo en-
try area.
sSONG PLAY
3Replace
4Overdub
e
Song Recording
TR1~TR32
PATTERN
CHORD
TEMPO
