![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/c/63/c63dd042-ea7f-42b8-b9ee-38209e8832a3/c63dd042-ea7f-42b8-b9ee-38209e8832a3-bg77.png)
118 Chapter 2. SONG MODE
Punch Recording
5. Song Recording
5. Press d [D1] to move the cursor to the song-
measure entry area. Set the measure at which you
want playback to begin.
• You will generally want to start playback several measures
before the punch-in point.
6. Press p.
▼ The PLAY indicator begins flashing, and song playback be-
gins from the measure you specified at Step 5 above. The
QY700 then automatically switches into recording opera-
tion when the song reaches the punch-in point. It then
resumes playback upon reaching the punch-out point.
7. Input the data you wish to record, in real time. When
you are finished, press s to return to the SONG PLAY
screen.
Punch-In Point
• This is the point within the song at which the QY700 be-
gins realtime recording operation. You set this point by speci-
fying its measure and beat.
Punch-Out Point
• This is the point within the song at which recording stops,
and the QY700 resumes song playback. You set this point
by measure and beat.
• With punch recording, you record over (replace) a specific
area in an already recorded track. You begin by setting up
the start and end points (the punch-in and punch-out points)
for the area you want to replace. You then record over the
area in real time.
• You set the punch-in and punch-out points by specifying
the measure and beat.
• With the exception of the punch-in and punch-out settings,
this method is identical to the REPLACE method for
realtime recording. For additional information, see page 112.
1. Starting from the SONG PLAY screen, press e.
▼ The QY700 displays the Recording Standby page. The RE-
CORDING indicator comes on.
2. Press 5 (PUNCH).
3. Press u or d as necessary to
select the track you want to record. You can select any
of the sequence tracks (TR1,...,TR32) or the PATTERN,
CHORD, or TEMPO track.
4. Press d [D2] to position the cursor in the punch-
point entry area. Set the punch-in and punch-out val-
ues (both measure and beat) using the data dial, n/
y, or the numeric keypad.
SHIFT F1 F2 F3 F4 F5 F6 SHIFT EXIT
Recording
track
Recording mode
Punch-in point
Punch-out point
Song measure
s
SONG PLAY
5
PUNCH
e
Song Recording
TR1~TR32
PATTERN
CHORD
TEMPO