111Chapter 2. SONG MODE
2
11. Meter
• This parameter sets the meter for each measure of the song.
The selected meter applies to all tracks.
• Although you will generally set these values before starting
to record, you are also free to set or change them after re-
cording is completed. If your song will include time
changes, you can record the whole song in a standard meter
such 4/4 and then make the required adjustments later.
• You can use step recording of the PATTERN track (→ p.125)
to adjust each measure’s meter value.
0101
1101
1/16,...,16/16, 1/8,...,16/8, 1/4,...,8/4
1. Press d [D3] to move the cursor to the meter set-
ting area.
2. Set the value using the data dial or the n or y key.
• To change the meter at some internal point within the song:
First select the measure at which you want to make the
change, and then set the meter value.
5. Song Recording
