60
BASIC CONCEPTS
Chapter 1
Pattern track recording
Style Section
001 01 FuncDeGo [A] intro
:: :
010 [E] fill2
:: :
022 [D] fill1
:: :
031 [F] ending
Recording the Song mode Pattern track
• You will record styles and sections on the Pattern track of
Song mode.
• If Styles and Sections have been entered into the Pattern
track, patterns will change automatically when the song is
played back.
• Here we will use Step Recording to record Styles and Sec-
tions on the Pattern track.
1. Enter Song mode.
• Press s to enter Song mode.
2. Select the song number.
• Move the cursor to the song number, and use the data dial,
n/y or numeric keypad → e to enter 01.
3. Press d/u to move the cursor to
the Pattern track.
4. Press e to enter Recording Standby condition.
5. Press 6 (STEP) to select Step Recording as the
recording mode.
6. Press r to start step recording on the Pattern track.
7. Move the cursor.
• Move the cursor to the locations for entering Style and Sec-
tion.
• First move the cursor to the Section for measure 001.
8. Enter the styles and sections.
• Use the data dial or n/y to enter the styles and sec-
tions.
• Styles can also be enter using numeric keypad → e.
• Sections can also be enter using the E2 – E3 microkeyboard.
• For locations which are blank, the pattern that was speci-
fied for the previous measure will be repeated.
• For the measure 001 Section, specify [A]intro.
■ Repeat steps 7 – 8 to input all the items from the above
table.
9. When all record has been completed, press s to stop
recording.
Song number
Pattern track
