![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/c/63/c63dd042-ea7f-42b8-b9ee-38209e8832a3/c63dd042-ea7f-42b8-b9ee-38209e8832a3-bg7e.png)
125Chapter 2. SONG MODE
2
5. Song Recording
Step Recording: PATTERN track
7. You can delete any incorrect entries by moving the
cursor back to the entry area and pressing 6
(Clear).
8. When you have finished, press s to terminate the
session and return to the SONG PLAY screen.
• Set the style number at the end of the song to 65 (=end). If
you set a different value, the song will not end. (→ p.113)
The remainder of this section describes the various screen set-
tings, and the use of the 6(Clear) function.
Location
• The location area indicates the measure at which the cursor
is located.
• You can jump the cursor to a different measure by entering
the corresponding measure number into this area.
1. Press d [D1] to move the cursor into the loca-
tion-setting area.
2. Select the new location using the data dial, n/y, or
the numeric keypad.
• You use this method to write settings into the PATTERN
track one item at a time. For each measure you can set the
meter, the style, and the section.
1. Starting from the SONG PLAY screen, press e.
▼ The QY700 displays the Recording Standby page. The RE-
CORDING indicator comes on.
2. Press 6 (STEP) to select step recording.
3. Press u or d as necessary to set
the recording track to PATTERN.
4. Press p.
▼ The PLAY indicator comes on. The QY700 displays the
step recording page for PATTERN-track recording.
5. Select the measure you want to work on, using either
of the following methods.
• Press d [D1] to move to the location parameter.
Select the measure using the data dial, n/y, or the
numeric keypad.
• With the cursor in the Meter, Section, or Style column,
press u or d to scroll up or down.
6. Press r or l to move the cursor to the appropriate
Meter, Section, or Style entry area, and enter the de-
sired value. You can enter any of these values using
the data dial or n/y. In addition:
• You can enter the style number using the numeric keypad.
• You can enter the section letter by pressing a
microkeyboard key from E2(A) to E3(H).
Location
SHIFT F1 F2 F3 F4 F5 F6 SHIFT EXIT
Style no. SectionMeterMeasure no.
sSONG PLAY
6Step Recording
e
Song Recording
TR1~TR32
PATTERN
CHORD