Advanced Operational Parameters
A-205 41-001343-02 REV04 – 05.2014
Advanced Operational Parameters
The following parameters in this section allow the system administrator to set advanced operational features on the IP
phones.
Blind Transfer Setting
Semi-Attended Transfer Settings
Update Caller ID Setting
Parameter –
sip cancel after blind transfer
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Forces the phone to use the Blind Transfer method available in software prior to release
1.4. This method sends the CANCEL message after the REFER message when blind trans-
ferring a call.
Format Boolean
Default Value 0 (disabled)
Range 0 (disabled)
1 (enabled)
Example sip cancel after blind transfer: 1
Parameter –
sip refer-to with replaces
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Flag for controlling the mode of a semi-attended transfer.
Format Boolean
Default Value 0
Range 0 or1
Example sip refer-to with replaces: 1
Parameter –
sip update callerid
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the updating of the Caller ID information during a call.
Format Boolean
Default Value 0 (disabled)
Range 0 (disabled)
1 (enabled)
Example sip update callerid: 1
