Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key
A-185 41-001343-02 REV04 – 05.2014
Customizing the Key Type List
Softkeys, Programmable Keys, Expansion Module Keys
Parameter–
hardkeyN line
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The line associated with the hard key you are configuring. The “hardkeyN line” parameter
can be set for the following key types only:
• speeddial
• blf
• list
• acd
• park
• pickup
• lcr
• blfxfer
• speeddialxfer
• speeddialconf
Format Integer
Default Value N (where N = line number)
Range 1 to 9
Example hardkey1 line: 9
Parameter –
softkey selection list
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to specify which key types to display and the order in which to display them
in the “Type” list for softkeys, programmable keys, and/or expansion module keys when
configuring the keys in the Aastra Web UI.
If no value is specified for this “softkey selection list” parameter, the key “Type” list dis-
plays ALL of the key types by default in the Aastra Web UI.
Notes:
• Any key types configured that do not apply to the phone’s environment are ignored.
• The SAVE and DELETE keys appear by default as
Keys 1 and 2 on the 6753i and 9143i, and as 5 and 6 on the 6730i , 6731i, and 6865i
unless specifically changed by your Administrator.
• An Administrator must use the English value when configuring the key types in the
configuration files.
• Any key type already configured on a phone displays in that key’s “Type” list, in addi-
tion to the values specified for this parameter.
• After configuring specific key types for a phone, the key types in the Aastra Web UI dis-
play the same for both the User and Administrator Web interfaces for that phone.
Format Alpha Characters in a comma separated list
