Overview
4-2 41-001343-02 REV04 – 05.2014
Overview
An administrator can configure the IP Phone Network and SIP options from the phone UI, from the Aastra Web UI, or
the configuration files. Administrator level options are password protected in both the IP phone UI and the Aastra Web
UI.
The procedures in this section include configuring from the IP phone UI and the Aastra Web UI. To configure the IP
phones using the configuration files, see AppendixA, “Configuration Parameters.”
To configure the phone using the IP phone UI, you must enter an administrator password. To configure the phone using
the Aastra Web UI, you must enter an administrator username and password.
References
For configuring the IP phone at the Asterisk IP PBX, see AppendixB, “Configuring the IP Phone at the Asterisk IP PBX.”
For sample configuration files, see AppendixC, “Sample Configuration Files.” These sample files include basic parameters
required to register the IP phone at the PBX.
Note:
An administrator has the option of enabling and disabling the use of password protection in the IP phone UI. This is
configurable using the configuration files only. For more information about this feature, see Appendix A, the section
“Password Settings” on page A-14.
Note:
In the IP phone UI, the default password is "22222". In the
Aastra Web UI, the default admin username is "Admin" and the default password is "22222".
