Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters
41-001343-02 REV04 – 05.2014 A-178
• filter - Indicates the key is set for activating/deactivating Executive Call Filtering (This
feature is not supported for the 6735i, 6737i, 6863i, 6865i, and 6867i in Release 3.3.1
SP3).
• callers - Indicates the key is configured to access the Callers List.
• redial - Indicates the key is configured to access the Redial List.
• conf - Indicates the key is configured as a Conference key.
• xfer- Indicates the key is configured as a Transfer key for transferring calls.
• icom - Indicates the key is configured to be used as the Intercom key.
• services - Indicates the key is set to be used as the Services key.
• phonelock - Indicates the key is set to be used to lock/unlock the phone.
• paging - Indicates the key is set for Group Paging on the phone. Pressing this key
automatically sends a Real Time Transport Protocol (RTP) stream to pre-configured
multicast address(es) without involving SIP signaling.
• empty - Indicates the key is configured to force a blank entry on the IP phone display
for a specific key.
Format Tex t
Default Value none
Range • none
• line
• speeddial
• dnd
• blf
• list ("BLF/List" in the Aastra Web UI)
• acd (“Auto call distribution” in the Aastra Web UI)
• dcp (“Directed Call Pickup” in the Aastra Web UI)
• xml
• flash
• sprecode
• park
• pickup
• lcr
• callforward
• blfxfer
• speeddialxfer
• speeddialconf
• speeddialmwi
• directory
• filter
• callers (“Callers List” in Aastra Web UI)
• redial
• conf
• xfer
• icom
• services
• phonelock
• paging
• empty
Example expm
od1 key1 type: line
expmod1 key2 type: speeddial
expmod1 key3 type: blf
expmod1 key4 type: list
