Operational, Basic, and Advanced Parameters
41-001343-02 REV04 – 05.2014 A-20
Parameter –
http server
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The HTTP server’s IP address. This will become effective after this configuration file has
been downloaded into the phone.
Optional: You can also assign an HTTP relative path to the HTTP server. See the next
parameter (http path).
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 66.
Format IP address or fully qualified Domain Name
Default Value 0.0.0.0
Range Not Applicable
Example http server: 192.168.0.132
Parameter –
http path
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The HTTP path name to enter.
If the IP phone’s configuration and firmware files are located in a sub-directory beneath
the server’s HTTP root directory, the relative path to that sub-directory should be
entered in this field.
Format dir/dir/dir
Default Value Not Applicable
Range Up to 256 alphanumeric characters
Example http path: ipphones/6757i
Parameter –
http port
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the HTTP port that the server uses to load the configuration to the phone
over HTTP.
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 66.
Format Integer
Default Value 80
Range 1 through 65535
Example http port: 1025
