Operational, Basic, and Advanced Parameters
A-21 41-001343-02 REV04 – 05.2014
Parameter –
https server
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The HTTPS server’s IP address. This will become effective after this configuration file has
been downloaded into the phone.
Optional: You can also assign an HTTPS relative path to the HTTPS server. See the next
parameter (https path).
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 66.
Format IP address or Fully Qualified Domain Name
Default Value 0.0.0.0
Range Not Applicable
Example https server: 192.168.0.143
Parameter –
https path
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The HTTPS path name to enter.
If the IP phone’s configuration and firmware files are located in a sub-directory beneath
the server’s HTTPS root directory, the relative path to that sub-directory should be
entered in this field.
Format dir/dir/dir
Default Value Not Applicable
Range Up to 256 alphanumeric characters
Example https path: ipphones/6755i
Parameter –
https port
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the HTTPS port that the server uses to load the configuration to the phone
over HTTPS.
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 66.
Format Integer
Default Value 443
Range 1 through 65535
Example https port: 1025
