Operational, Basic, and Advanced Parameters
41-001343-02 REV04 – 05.2014 A-132
SIP Diversion Display
Global Setting
Parameter–
bellcore cadence dr4
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the cadence for Bellcore-dr4.
Note:
You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format Integer
Default Value 300,200,1000,200,300,4000
Range Not Applicable
Example bellcore cadence dr4: 300,200,1000,200,300,300,200,4000
Parameter–
bellcore cadence dr5
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the cadence for Bellcore-dr5.
Note:
You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format Integer
Default Value 500,-1
Range Not Applicable
Example bellcore cadence dr5: 500,-1
Parameter –
sip diversion display
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Global parameter that enables/disables the display of the Caller ID and/or caller name, and
reason for diversion on the phones LCD for an outgoing call that is being diverted to another
destination. The phone that receives the diverted call displays the Caller ID of the original call
destination.
Note:
You must restart the phone after setting a value for this parameter.
Format Boolean
Default Value 1
Range 0 (disabled - do not display diversion information to the phone’s LCD)
1 (enabled - display diversion information to the phone’s LCD)
Example sip diversion display: 0
