Filter
Top Products
Configuration Commands
WFM 601A, WFM 601E & WFM 601M User Manual
C–7
ARROWhead:LIMIT:PAL <MV_700 | MV_950>
Sets the PAL gamut limit amplitude on the ARROWHEAD graticule. The gamut
limit triggers an alarm when exceeded by the input signal. This selection
corresponds to the choices available under GAMUT in the CONFIG GAMUT
menu.
Use the command DISPlay:SINGLE:GAMut to enable the GAMUT display.
ARROWhead:LIMIT: PAL <MV_700 | MV_950>
ARROWhead[:LIMIT | :LIMIT:PAL]?
<MV_700 | MV_950>
arrow:limit:PAL mv_950
arrow:limit:pal MV_700
arrow:limit:pal?
:ARROWHEAD:LIMIT:PAL MV_700
ARROWhead:LIMIT:NTSC <IRE_100 | IRE_110 | IRE_120 | IRE_131>
Sets the NTSC gamut limit on the ARROWHEAD graticule. The gamut limit
triggers an alarm when exceeded by the input signal. These selections correspond
to the choices available under GAMUT in the CONFIG GAMUT menu.
Use the command DISPlay:SINGLE:GAMut to enable the GAMUT display.
ARROWhead:LIMIT:NTSC <IRE_100 | IRE_110 | IRE_120 | IRE_131>
ARROWhead[:LIMIT | :LIMIT:NTSC]?
<IRE_100 | IRE_110 | IRE_120 | IRE_131>
arrow:limit:ntsc ire_120
arrow:limit:ntsc ire_131
arrow:limit:ntsc?
:ARROWHEAD:LIMIT:NTSC IRE_131
Syntax
Arguments
Examples
Returns
Syntax
Arguments
Examples
Returns