Filter
Top Products
23
F
R
O
N
T
R
I
G
G
I
N
G
S
HIGHEST POSITION
MIDDLE POSITION
LOWEST POSITION
Seat Support
Collar
Mounting
Hole
Middle
Mounting
Hole
Seat Support Post
Nut
Bolt
Seat Support
Collar
Mounting
Hole
Top Mount-
ing Hole
Seat Support Post
Nut
Bolt
No Seat Support
Collar Required
Welded
Collar
ADJUSTING THE SEAT SUPPORT
POSTS (FIGURE 6)
NOTE: If the retaining pin will NOT pass through the
seat mounting support AND through one (1) of the
three (3) height mounting holes in the seat support
post, perform the following steps:
1. Loosen, but DO NOT remove, the hex bolt
securing the seat support post to the seat
stand.
2. Grasp the seat support post and rotate it until
the height adjustment holes align with the
holes in the seat mounting support.
3. Keeping the holes aligned, tighten the hex bolt
securing the seat support post to the seat
stand.
4. If necessary, repeat STEPS 1-3 for the re-
maining seat support posts.
FIGURE 6 - ADJUSTING THE SEAT SUPPORT POSTS
Hex Bolt
Seat
Support
Post
Seat Stand
Height Adjustment
Holes
Rotate to
Align Holes
S
E
A
T
SEAT PROCEDURE 5
FIGURE 5 - ADJUSTING THE SEAT HEIGHT - SEAT
ASSEMBLIES WITH SEAT SUPPORT COLLARS