Filter
Top Products
17
ARMREST DEPTH ADJUSTMENT
(FIGURE 3)
1. Loosen bottom adjustment knob.
2. Adjust armrest to desired position.
3. Retighten bottom adjustment knob securely.
NOTE: Perform STEPS 4-5 to adjust BOTH arm-
rests to the same depth.
4. Measure distance from the end of the armrest
pad to the end of the armrest support post.
5. Repeat STEPS 1-4 for opposite armrest setting
armrest at distance determined in STEP 4.
FIGURE 3 - ARMREST DEPTH ADJUSTMENT
Bottom
Adjustment
Knob
Armrest
Measure This
Distance
ARMREST HEIGHT ADJUSTMENT
(FIGURE 4)
1. Loosen, but do not remove, the stability set
screws on the armrest post.
2. Remove the mounting screw and locknut that
secure the armrest in place.
3. Adjust armrest to desired mounting position
and secure with existing mounting screw and
locknut. Securely tighten.
4. Retighten the stability set screws on the arm-
rest post.
NOTE: Perform STEPS 5-6 to adjust BOTH arm-
rests to the same height.
5. Count the number of exposed mounting holes
above the armpost.
6. Repeat STEPS 1-4 for opposite armrest setting
armrest at the mounting hole determined in
STEP 5.
Armpost
Stability
Set
Screws
Mounting
Screw
Locknut
Armrest
Count These
Holes (STEP 5)
FIGURE 4 - ARMREST HEIGHT ADJUSTMENT
A
R
M
S
ARMS PROCEDURE 4
Armrest
Support
Post
End of Armrest Pad
End of
Armrest
Support
Post